Kingspan Kooltherm K107 Insulation
Kingspan Kooltherm K107 is part of the Kingspan Insulation ‘Lower Lambda’ product range. With a higher rated thermal conductivity Kooltherm K107 replaces Kingspan Kooltherm K7. Being a premium quality pitched roof insulation K107 can be installed at a thinner thickness than the standard PIR insulation board to hit the required target ‘U’ Value. With a Super low thermal conductivity of 0.019 W/m.K Kingspan K107 has to be the number one choice when installing roof insulation. K107 is constructed from a phenolic foam rigid thermoset fibre free core with low emissivity foil facings on both sides. With a range of thicknesses from 25mm up to 150mm with a few of these manufactured to order.
where to use Kingspan K107 insulation board
Kingspan Kooltherm K107 should be able to cover most current roof insulation projects. Importantly Kingspan is manufactured using a blowing aget that has zero ozone depletion potential and a low global warming potential. Noteworthy is that Kingspan recommend Kingspan K107 for use in loft conversions where re-roofing is not required. Importantly K107 insulation boards are to be used in cut to fit roof insulation projects and for use under rafter to eliminate any possible cold bridging through the roof timbers. Because this phenolic foam roof insulation can reach high thermal resistance values you are able to keep the thickness to a minimum. For more information on this great new insulation product please do call our national sales team.
Kingspan Kooltherm K107 roof insulation
SPECIFICATION: 25mm – 140mm
PRODUCT INFORMATION: Kingspan K107
SEE OUR BLOG ABOUT ALL NEW Kingspan Kooltherm Insulation